Commit cb1f9ac2 authored by Jenni Rinker's avatar Jenni Rinker
Browse files

updating report text

parent c63c6b1f
......@@ -4,6 +4,19 @@
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{pdflscape}
\usepackage{enumitem}
%\newenvironment{tablist}{\vspace*{-18pt}
% \begin{itemize}{}\itemsep-3pt\itemindent-12pt
%}{
% \end{itemize}
%}
\newenvironment{tablist}{
\begin{itemize}[nosep, leftmargin=9pt]
}{
\end{itemize}
}
\title{The DTU 10 MW RWT HAWC2 Model}
......@@ -14,26 +27,99 @@
% ----------------------------------------------------------------
\section{Introduction}
% ----------------------------------------------------------------
\section{Model history}
% TABLE. Model versions.
Main contributors larh and anyd up to verion 4.
Then leo bergami in verion 4.
\begin{landscape}
% TABLE. Model versions, part 1.
\begin{table}\centering
\caption{Summary of model versions (Part 1)}\vspace*{0.1cm}
\begin{tabular}{c|p{4in}|p{4in}}
Version & Notes/Changes to HAWC2 files &
Notes/Changes to HAWCStab2 files \\\hline
9.1 & \begin{tablist}
\item Updated DLLs.
\end{tablist}
& \\\hline
9.0 & \begin{tablist}
\item Updated version number in header and simulation and output blocks.
\item Updated comments in DTU Basic block and added new lines for new controller version.
\item Updated array sizes in generator servo, mechanical brake and servo with limits.
\item Replaced old tower clearance with \texttt{towerclearance\_mblade}.
\end{tablist}
& \begin{tablist}
\item Added verbose output.
\end{tablist} \\\hline
8.0 & \begin{tablist}
\item DLL source code removed.
\item Version updated in htc header and log/simulation names.
\item Total time to 1000 seconds and $\Delta t$ from 0.02 to 0.01.
\item Controller changed to DTU Basic and retuned.
\item Maximum brake torque updated and sign error in mechanical brake fixed again.
\item Output channels updated.
\end{tablist}
& \begin{tablist}
\item Operation data recalculated for different wind speeds (5 to 25), certain columns removed and renamed.
\end{tablist}
\end{tabular}
\end{table}
% TABLE. Model versions, part 2.
\begin{table}\centering
\caption{Summary of model versions}\vspace*{0.1cm}
\begin{tabular}{c|p{2in}}
Version & Notes/Changes \\\hline
9.1 & \\
9.0 & \\
8.0 & \\
7.0 & \\
6.0 & \\
5.0 & \\
4.0 & \\
3.0 & \\
2.0 & \\
1.0 & \\
\caption{Summary of model versions (Part 2)}\vspace*{0.1cm}
\begin{tabular}{c|p{4in}|p{4in}}
Version & Notes/Changes to HAWC2 files &
Notes/Changes to HAWCStab2 files \\\hline
7.0 & & \begin{tablist}
\item Added pitch controller block.
\item Added quadratic example.
\end{tablist}
\\\hline
6.0 & \begin{tablist}
\item Typo removed in end of blade structural file.
\end{tablist} &
\\\hline
5.0 & \begin{tablist}
\item DLL source code directory renamed.
\item Sign error fixed in mechanical brake.
\end{tablist} &
\\\hline
4.0 & \begin{tablist}
\item Small changes in comments of HAWC2 file.
\item HAWC2 file changed from turbulent to step-wind.
\item HAWC2 file updated and re-tuned for presumably a new version of the Risoe Controller.
\item Mechanical brake added.
\end{tablist} &
\begin{tablist}
\item Small changes to comments.
\item Updates to miscellaneous parameters in HAWCStab2 block (pitch actuator to 1 Hz, generator speed no longer integer, max power changed slightly, controller renamed to DTU basic)
\item Changed from constant power to constant torque in HAWCStab2 block.
\item Operation file regenerated and renamed.
\end{tablist}
\\\hline
3.0 & \begin{tablist}
\item Changes in DLL source code.
\end{tablist} &
\begin{tablist}
\item Updates to node numbers in HAWCStab2 block.
\end{tablist}
\\\hline
2.0 & \begin{tablist}
\item Addition of source code for HAWC2 DLLs.
\item Mass-proportional damping removed on all bodies, damping on some bodies re-tuned.
\end{tablist} &
\begin{tablist}
\item Addition of HAWCStab2 htc and operational files.
\end{tablist}
\\\hline
1.0 & & \\
\end{tabular}
\end{table}
\end{landscape}
% ----------------------------------------------------------------
\section{Simulations}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment